PRODUCT LITERATURE

Acceptable Pneumatic Nail Substitutes Prime Source Grip-Rite© Nails, Paslode Positive Placement NailsTM, Bostitch Metal Connector Nails, Halsteel Nails and Hitachi©

Allowable Design Loads for Truss Connections Including Low Heel Heights, Short Headers, and ANSI/TPI Reductions

Allowable Loads for Top Mount Hangers Installed on Wood Nailers

Attaching Deck Ledger to Rim Board

Attaching Deck Ledger to Rim Board in North Carolina

Attaching Ledger-to-Studs with One or Two Layers of 5/8' Gypsum Wallboard

Attachment of Sole Plate to Rim Board with Structural Screws to Resist Lateral Load

BPH Series

Connector Selector Guide

Connector Solutions to Meet Prescriptive Loads of 2006 IRC Table R404.1(1)

Corrosion Protection Advisory

CSI Part Specification

Design of Backer Blocking for MiTek Connectors and Trusses

Design of Filler Blocking with MiTek Hangers

EWP Installation Guide

Face Mount Hanger 'Gap' Testing

FWH Fire Wall Hanger Installed Over APA Rated Sheathing

GHF, HD, SUH, THD, THDH, THF Series

HD – Face Mount Hanger

HLBH, KGLS, KGLT, KHGLS, KHGLT Series

Hollow Column Uplift Connection Using TDX2-TZ Holdown and CMST12 Coil Strap

Hurricane Anchor Installation to Achieve Twice the Load

HUS26 – Face Mount Hanger

HUS28 – Face Mount Hanger

HWUH, KHW, PHM, PHXU, SW, SWH Series

Installation of Hurricane Ties Placement on the Interior or Exterior Side of Walls

IRC Intermittent Bracing Methods Solutions for Narrow Wall Segments Including Alternate Wall Bracing (AWB) Portalframe with Holdowns (PFH) and Portal Frame at Garage (PFG)

JL210 – Joist Hanger

JL28 – Joist Hanger

Joining Multi-ply Dimensional Lumber Beams with WSWH Screws

Joining Multi-ply Engineered Wood (EWP) Beams with WSWH Screws

JUS26-2 – Face Mount Hanger

JUS28 – Face Mount Hanger

LTS19-TZ Deck Lateral Load Connector

MSH422IF – Strap Hanger

North Carolina Single Top-Plate Splice Connection

Options for Multiple-Beam Bolted Column Caps

Options for Multiple-Beam Column Caps

Part Number System for TFL, THO & THF Hangers Flyer

Plated Truss Installation Guide

SBP Field Alteration for Installation on Sheathed Framing or Wider Top Plates

SKH210L/R – Skewed 45° Hangers

SNP3 Skewed Nail Plate Alternate Installation

Straps in Field Bent Applications (MSTC, RS, & CMST)

Supplemental Bearing Capacity of Hurricane Ties

T10 Hoist Plate Installed with LumberLok Exterior Structural Connector Screws

THD210 – Truss Hanger

THD210-2 – Truss Hanger

THD210-3 – Truss Hanger

THD26 – Truss Hanger

THD28 – Truss Hanger

THD28-2 – Truss Hanger

THD410 – Truss Hanger

THD412 – Truss Hanger

THD414 – Truss Hanger

THD46 – Truss Hanger

THD48 – Truss Hanger

THD610 – Truss Hanger

THD612 – Truss Hanger

THDH26 – Heavy-Duty Truss Hanger

THDH414 – Heavy-Duty Truss Hanger

THO, TFL, IHFL, IHF, THFI Single-Ply I-Joist Hangers Uplift Values With No Joist Nails Installed

Uplift Connection for Woodtone RealPost™

Uplift Connector Options – Concrete/Masonry Truss to wall connectors for concrete/masonry wall construction

Uplift Connector Options – Wood Frame Truss to wall connectors for wood frame construction

Use of Products with Paslode Positive Placement Nails

WS Wood Screw Installation for 2 Ply 4×2 Floor Trusses

WS Wood Screw Installation for LVL, LSL, or PSL Members

WS Wood Screw Installation for Multi-Ply Wood Trusses

WSTS Truss and Wall Tiedown Installations