Engineering Details

BACKPAGE Back page of MiTek sealed drawing

MII-4_PLY_SCREW Standard bolt to screw truss connection detail

MII-BLCK3.5 Bearing Block Detail (3-1/2” actual bearing size)

MII-BLCK3.5-SPF Bearing Block Detail (3-1/2” actual bearing size, SPF No.2 bearing block)

MII-BLCK3.5-SP Bearing Block Detail (3-1/2” actual bearing size, SP No.2 bearing block)

MII-BLCK5.5 Bearing Block Detail (5-1/2” actual bearing size)

MII-BLCK5.5-SPF Bearing Block Detail (5-1/2” actual bearing size, SPF No.2 bearing block)

MII-BLCK5.5-SP Bearing Block Detail (5-1/2” actual bearing size, SP No.2 bearing block)

MII-CORNER_SET Open jack and corner hip rafter detail

MII-FLOOR1 Floor truss bearing detail

MII-HINGE-P Field peak cap connection detail

MII-OPEN_JACK-BLOCKS Support of bottom chord of standard open end jack using pressure blocks

MII-RIBBON Standard Ribbon Block Detail

MII-STRGBCK Strongback detail

MII-STUD_ATTACHMENT Non-structural gable stud attachment

MII-TimberLOK Truss to wall connection with TimberLOK screw detail

MII-TimberLOK(GABLE) TimberLOK gable truss connection detail

MII-TimberLOK(SINGLE_TOP_PLATE) TimberLOK single top plate to truss connection detail

MII-TimberLOK2 TimberLOK screw detail for rafters

MII-WISCBLOCK Standard Wisconsin end wall blocking detail

SHEAR BLOCKING Typical drag/shear blocking truss explanation