Fasteners

Gold Coat Hex Head Exterior Structural Wood Screws

ws-gc

Reference Series: -- --
The Gold Coat Hex Head can be used with a number of MiTek connectors as well as wood-to-wood and steel-to-wood connections. Head stamped to indicate length for easy inspection.

Features & Benefits:
• 1/4" diameter
• No predrilling
• Comparable to 1/2" lag screw
• Type 17 point reduces installation torque and splitting
• 3/8" hex drive
• Length identification stamps on all heads

Materials: 1/4" diameter Grade 5 steel

Finish: Gold Coat

Code Reports: View Code Report Table

Installation

  • Screws are self-drilling.
  • Install using a low speed clutch drill with 3/8" hex head driver. The washer head should be flat to the surface and the serrations will oppose turning and release the clutch. Do not over-tighten the screws.
  • Installing the screw at an angle may introduce additional bending and tension forces into the fastener if the screw head is not flat on the bearing surface. Care should be given to ensure the fastener is installed perpendicular to the plane of the side plate.

Need Help or Have a Question? Contact Customer Service or Call 800-328-5934

 

Option Details:

Code Report Table

MiTek Stock# ICC-ES IAPMO FLORIDA LA CITY
WS15-GCR25
2761  FL17231 LABC_ESR-2761