Reference Series: WT
The WT wall ties are used for securing brick facade walls to a wooden structural panel. They are installed in the brick mortar joint and attached to the wooden sheathing with 10d nails. They are 6-1/2" long which provides up to a one inch space between the brick wall and sheathing. Check with your local Building Official for minimum spacing requirements.
Materials: 22 gauge
Finish: G90 galvanizing
Code Reports: View Code Report Table
ResourcesMiTek Product Catalog
- Use nails appropriate for intended use.
- The opposite end must be bonded in the mortar joint of brick facade.
- Check local codes for spacing requirements.
- Wall tie shall be bent at nail, bonding into mortar joint.
WT22 Wall Tie
Corrosion Resistant Products TableView / Download the above load table as a PDF
Code Report Table
Product meets Prescriptive Code Requirements
No Code Listing