Concrete and Masonry

Embedded Truss Anchors

TA / TAR

Reference Series: -- --
TA – Anchors are rated for both uplift and lateral loads. They can be installed straight or field-bent around truss or rafter members. An embossed embedment line assures accurate embedment depth.
TAR – Riveted anchors provide a moisture barrier in addition to uplift and lateral resistance all in one product.
Materials: 14 gauge
Finish: G90 galvanizing
Code Reports: View Code Report Table

Installation

  • Use all specified fasteners.
  • Embed 4″ into concrete tie beam or masonry bond beam.
  • For double anchor installations: anchors should be installed on opposite sides of wood member and offset 3/4″ from each other in bond beam or concrete tie beam.
  • Designer may specify alternative nailing schedules. Refer to Nail Specification Table Click here for nail shear values, load values shall not exceed published allowable loads.
  • When using alternative nailing schedules, lower-most holes in strap shall be filled progressing upward towards the top of the strap.
  • Straps may be installed straight or wrapped over to achieve table loads.
  • Moisture barrier will be required in TA installations unless another moisture remediation method is used.

Need Help or Have a Question? Contact Customer Service or Call 800-328-5934

Code Report Table

TA12

No Code Listing

TA14

No Code Listing

TA14R

No Code Listing

TA16

No Code Listing

TA16R

No Code Listing

TA18

No Code Listing

TA18R

No Code Listing

TA20

No Code Listing

TA20R

No Code Listing

TA22

No Code Listing

TA22R

No Code Listing

TA24

No Code Listing

TA24R

No Code Listing

TA36

No Code Listing

High Wind Drawings

MiTek Stock # Download or View Files
TA
Bond/Tie Beam to TrussDWGDXFPDFView Image
TA20
Bond/Tie Beam to TrussDWGDXFPDFView Image
TA51
Foundation Inside ViewDWGDXFPDFView Image