Concrete and Masonry

Home / U.S. Products / Connectors / Concrete and Masonry / Anchor Bolts

Anchor Bolts

AB

Reference Series: -- --

The AB anchor bolt provides an economical way to meet the prescriptive requirements of the 2018 IRC for securing mudsill plates to a concrete or masonry foundation. The bolt is manufactured from ASTM 1554 steel and has a hot-dip galvanized finish. A nut (ASTM A 563) and washer (ASTM F 844) are included.
Note:] In some jurisdictions, a plate washer may be required. Check with your local Building Official.

Materials: Bolt: ASTM F 1554; Nut: ASTM A 563; Washers: ASTM F 844

Finish: Hot-dip galvanized

Code Reports: View Code Report Table

Installation

Select appropriate AB Anchor Bolt.
Use concrete with minimum compressive strength of 2,500 psi at 28 days.
Nuts and washers are included.
Anchor bolts intended for use to satisfy code prescribed anchoring of mudsill plates, and shall be installed as defined in the code.
Allowable loads shall be derived in accordance with the code.
Plate washers may be required in some regions.
Reference IRC R403.1.6, IBC 2308.3.1, 2308.3.1.1, 2308.3.1.2 for minimum diameter and embedment into masonry or concrete.

Need Help or Have a Question? Contact Customer Service or Call 800-328-5934