Solid Sawn Hangers
Reference Series: PF
The JPF Purlin Hangers provide an economical solution when attaching purlins together, back-to -back.
Materials: 20 gauge
Finish: G90 galvanizing
Code Reports: View Code Report Table
ResourcesMiTek Product Catalog
- Use all specified fasteners.
- Diamond holes allow optional header nailing.
- Joist nails must be driven at a 30° to 45° angle through the purlin into the header to achieve listed loads. Standard length “double shear” nails must be used to achieve listed load values.
- 16d sinkers (0.148″ dia. x 3-1/4″) may be used where 10d commons are specified with no load reduction.